|
Buffing
Compounds
Please read
the
Shipping Terms & Information page regarding shipping charges
before ordering.
|
Polishing stabilized,
sanded pen blanks to a high gloss, even after the use of extremely fine
abrasives, is possible by first using Tripoli and then using the White
Diamond buffing compounds. These compounds contain extremely fine
abrasive that are designed to remove any light scratches produced by
paper and/or cloth abrasives. The Tripoli bar is priced at $3.75 and the White Diamond is priced at $3.75. Each bar will polish
thousand's of pens as very little of this material is needed on your
buffing wheels. You will need two separate buffing wheels for the
process to work successfully as you do not want to use the same wheel
for both compounds. |
To Order Tripoli Buffing
Compound
Click Here
To Order White Diamond
Buffing Compound
Click Here
Micro-Gloss TM
Liquid Abrasive
 |
|
Made by the same company
that manufactures Micro-Mesh,
Micro-Gloss
is formulated to remove, not hide, superficial scratches and
light surface damage. A
general purpose water-based liquid that uses a 1 micron
abrasive crystal. An excellent compound for use on acrylics!
Comes in an 8oz bottle with dispenser. $8.95.
Click Here to order.
Special note: This compound is meant to be used with a
buffing wheel. We strongly recommend that you have one
dedicated buffing wheel for Micro-Gloss.
You do not want any other buffing compound to come in
contact with the wheel used for Micro-Gloss.
When not using the dedicated Micro-Gloss buffing
wheel store in a plastic zip-lock bag to keep it clean. |
Buffing Arbor
6" Muslin Buffing Wheel shown with the #2MT Arbor
Assembly
6" Muslin Wheel $8.50
8" Muslin Wheel $9.99
#2MT Arbor with 1/2" threaded shaft $15.99
(buffing wheels sold separately)
Made in the USA!
The shaft is made from one solid piece of steel; 1/2-13
thread
#1MT Arbor with 1/2" threaded shaft $15.99
(buffing wheels sold separately)
Arbor assembly installed in a lathe. The
tailstock
(with live center installed) should be moved up to support the buffing
assembly.
Arbor assembly utilizing the #2MT to #2MT
Extension.
The extension allows for more room between the headstock and tailstock.
The tailstock
(with live center installed) should be moved up to support the buffing
assembly.
#2MT to #2MT Extension $13.99
This extension is also a
great accessory when truing up pre-turned bowls!
#1MT (male) to #2MT (female) Extension $13.99
Allows the #2MT buffing arbor to be used in a lathe having a #1MT
Please read the
Shipping Terms & Information page regarding shipping charges
before ordering.
|
