|
|
|

We are THE
suppliers of 'Eye Candy'
TM |
|
|
Printed Catalog
At the present time we do not have a printed catalog.
Internet sales allow us to keep our prices low and be competitive. |
For your security...
When ordering through our website we use
thawte 256 bit encryption
for all communication. |
|
|
|
Our website pages are
best viewed with your
"Favorites" column turned 'off'. |
|
|
We do not ship orders outside of the
continental United States - Hawaii & Alaska are OK.
APO & FPO orders are accepted. |
|
|
New Items
This is where you'll find new items that we have added to our extensive inventory.
BHW-470
304 Stainless Steel Mini-Stoppers
Patent Pending


The full-size BHW-469 bottle
stopper (left) and the BHW-470 Mini
Stopper (right)
Made & photographed by Ed
Davidson
We have received numerous requests
for a smaller bottle stopper made from stainless steel.
We are proud to introduce to you the Mini-Stopper!
Machined from one solid piece of 304 Stainless steel bar
stock, these little beauties are made right here in the
United States. They come with the same reliable & long
lasting black silicone rubber wedge seal found on all of
the stoppers we carry in this style (the seals are
pre-installed by us and you don't have to worry about
them breaking). This one piece unit comes with the
tenon cut with the same 3/8"-16 threads as our other
black silicone wedge stoppers. The threaded tenon
is not removable.
The Mini-Stoppers have an overall length of 2 11/32" (including the threaded tenon). Top of flat
base to the pointed tip measures approximately 1 7/8"
long and the base diameter measures approximately .734".
As you can see in the picture below the Mini-Stopper
fits lower in a bottle with a smaller opening. Keep in
mind that the inside hole diameter of wine bottles vary
as much as the selection of candy bars at your local
market.
|
 |
 |
This Mini Stopper was made with EPR and photographed by
Ed Davidson
To order the
BHW-470 Stoppers
Click Here
This discount pricing shown below
only applies to the BHW-470 stoppers
| 1-10 |
$6.50 |
| 11-50 |
$5.95 |
| 51-99 |
$5.85 |
| 100 + |
$5.70 |
| Note: |
|
|
This stopper uses a different sizing bushing.
If you already own one of our AZSBSM-01 Bottle
Stopper Mandrels you can buy just the sizing
bushing:
No. 2 Sizing Bushing $1.99 |
|
| |
|
BHW-470 Bottle Stopper Only
 |
Drill Chuck

|
|
$8.99 AZSBSM-02
The collar acts as a bushing for the proper sizing to match the bottle
stopper
Click Here To Order
New item
11/32" Norseman TM Drill Bit
$5.65
Click Here To Order
|
| We carry a heavy duty 1/2" drill chuck and arbor to hold the
different
bottle stopper mandrels. This chuck can also be used for many other
projects as well. |
Click here to order the drill chuck with #2MT arbor.
Price is $36.95
Click Here to order the
drill chuck with a #1MT arbor.
Price is $36.95
|
| |
|

| We also stock 3/8"-16 bottom taps for those who would rather drill and tap
(thread) a hole instead
of just forcing the bottle stopper block onto the mandrel. The tap requires
a 5/16" drilled hole. |
3/8"-16 Norseman Bottom Tap $3.95
5/16" Norseman Drill Bit $4.49
(for use with the 3/8"-16 bottom tap)
Large Tapping Handle $9.50
|
Bottle
Stopper Buffing Handle

| Have you ever had the
sad experience of having a finished bottle stopper blank get
'caught & thrown' by a buffing wheel? Using our Delrin
handle will give you a much more secure way of buffing the
stoppers and not having to worry about dodging a run-a-way
stopper block. The handle is 7" long and comes
complete with two Delrin bushings for shallow or deep
3/8"-16 threads. This handle will work with the BHW-465,
-466, -467, -468 and the -469 series stoppers. |
| $11.35 |
|
Click Here To Order |
|
|
|
Maple Pen Box with
Recessed Lid

A clear maple pen box with a recessed lid. The box comes with a
single pen insert (European size and smaller).
These boxes will accommodate the larger pens than are bigger in diameter
and have larger clips.
The insert can be removed and the box can be used as a jewelry box.
Large Maple Pen Box with recessed lid $6.95 each $6.50 each for 10
or more
To order the large maple
pen boxes with recessed lids
Click Here
To view a list of available inserts
Click Here
Fiesta Acrylic
Pen Blank

Pearlized purple with orange
and yellow swirl |
|
|
|
1-9 |
10-19 |
20-29 |
30-39 |
40-49 |
50-59 |
60+ |
|
$3.50 |
3.30 |
3.00 |
2.90 |
2.80 |
2.60 |
2.50 |
|
| |
 |
Turning Threaded Boxes
by John Swanson
As John Swanson
states, "A box with a friction fit lid is nice; a box with a
threaded lid is extra special." In this book, John takes the
reader through every step necessary to create beautiful turned
wooden boxes with threaded lids. Accompanying the precise and
detailed text are over 250 color photographs, showing every
technique and tool used by the author. A box layout table is
also provided to ensure that the boxes you turn on your lathe
will have the proper proportions between the lid and the base.
Once the box has been turned on the lathe and successfully
threaded, instructions for adding a lustrous, durable finish are
provided. Also included in this valuable text are gallery
photographs featuring many beautiful box designs turned in a
variety of woods. This book is a must for every woodturner who
has ever wanted to create boxes "with a twist."
64 pages, 256 photographs, 8 1/2" x 11", soft cover
Price: $14.95
Click Here to Order |
|
|
|
|
|
|
|
|
|
 |
Turning Boxes with
Friction-Fitted Lids
by Bill Bowers
An informative book designed for beginning and
intermediate turners. Bill Bowers leads this step-by-step
workshop for constructing the classic cylinder box, cylinder box
variants with embellishments, the classic capsule box, and
capsule box variants with chatter tool work. With over 300 color
photos, each step is clearly described and illustrated, from
mounting the blank on the lathe to finishing. Projects include a
Raffan box, a pagoda box, the clam shell box, the gourd box, and
small hollow form boxes with bottle top and finial top lids. A
photo gallery helps give more ideas for new turned box styles.
64 pages, 300 photographs, 8 1/2" x 11", soft cover
Price: $14.99
Click Here to Order |
Coral!
|
Badger Hair Shaving Brushes
|
|
|
 |
 |
Crosscut Chokte Viga with Rose Engine
embellishments.
Made & photographed by Ed Davidson |
|
For more information and pictures
Click Here |
|
|
 |
Summer
2008

Price: $6.49
Purchased with an order through our website: $5.49
Click Here To Order |
Berea Hardwoods
Invisavue
TM
Pen Blanks

To view more information and view an additional picture
Click Here
First we introduced the DoHickey's and now we have...
Gizmo's!

Baron rollerball pen made and photographed by Ed Davidson

To see what this is all about
Click Here
Old Glory Bottle Stopper
Blocks

|
|
|
Old Glory Bottle Stopper Blocks $
6.75 |
|
Red, white and blue never looked so good!
The American flag is placed on a sloped colored base. |
|
Red Base
White Base
Blue Base |
|
$Buck$ Bottle Stopper Block
$Buck$ Pen Blanks
Ed's $Buck$ and
EPR Pen Blanks

Made and photographed by Ed
Davidson
A
closed end black titanium Baron rollerball pen
'all cashed out'.
Cosmetic
Brushes
Here is a whole new
product line....
Cosmetic
Brushes and 3D Bottle Stopper Blocks

Made and photographed by Ed
Davidson
Dior premium cosmetic brushes made with
Afzilia Xylay, figured mesquite and figured mesquite
|
|
|